Screed
In the hierarchy of a building, the screed is often underestimated, yet it is the most important link between raw concrete and high-quality floor covering. It is the load-distribution layer that ensures point loads (such as a heavy wardrobe) do not overstrain the substrate. At the same time, it is the “smoother” that levels out unevenness in the structural slab and—in the age of underfloor heating—becomes a gigantic radiator.
The most common types of screed at a glance
Depending on the binder and area of application, different specialists are distinguished:
Cement screed (CT): The all-rounder. It is robust, waterproof, and therefore the first choice for bathrooms, garages, or outdoor areas. Its drawback: it takes forever to dry (usually 28 days until ready for covering) and tends to crack as it shrinks.
Anhydrite screed / calcium sulfate screed (CA): The favorite of interior professionals. It hardly deforms, has extremely low internal stress, and can be processed excellently as flowing screed. Since it conducts heat fantastically, it is the natural partner of any underfloor heating system. Its enemy: persistent moisture (so not suitable for the shower).
Mastic asphalt screed (AS): An exotic option for special cases. It is installed hot, requires no water, and can bear loads immediately after cooling. It also provides excellent sound and thermal insulation.
Magnesia screed (MA): Previously often found in industrial halls. It is extremely hard and low-dust, but reacts badly to moisture and metals (risk of corrosion).
Construction types: How screed “floats”
It is not only a matter of what is in it, but how it is laid:
Bonded screed: Directly bonded to the substrate. Extremely durable, but without sound insulation.
Screed on a separating layer: Separated from the substrate by a foil layer—ideal when the substrate must not absorb moisture.
Floating screed: It has no contact with walls or floor (separated by insulation and edge insulation strips). This is the gold standard for sound insulation in residential construction.
The ultimate challenge: residual moisture
The biggest source of errors on construction sites is impatience. Before parquet or tiles may be laid, the screed must be “ready for covering.” This is usually checked with the CM measurement (calcium carbide method). Laying too early risks swelling wood or flaking tiles—an expensive nightmare that can be avoided through consistent ventilation and heating.
The centerpiece of interior finishing
A good screed is like a good soccer referee: you only notice it when it makes mistakes. Cracks, curling (upward warping at the corners), or moisture damage are almost always the result of wrong material selection or time pressure. Those who prioritize precision and the right drying time here create a base that literally remains stable for decades. Screed is the quiet foundation of our everyday comfort. For more information on transparent repair documentation, visit repair fair.