Plane
The plane is one of the oldest and most important hand tools in woodworking. Unlike a chisel or carving knife, in planing the cutting tool (the plane iron) is guided in a fixed housing (the plane body). This makes it possible to remove wood layers with a precisely defined thickness. The underside of the plane, the sole, serves as the reference surface: it ensures that unevenness in the wood is leveled and a perfectly smooth surface is created, often so fine that subsequent sanding becomes unnecessary.
The anatomy of a hand plane
A classic plane consists of several highly precise components:
Plane body: Traditionally made from hard woods such as hornbeam or lignum vitae, today often made from gray cast iron or steel.
Plane iron: A sharpened steel plate set in the body at a specific cutting angle (usually $45^\circ$ for standard planes).
Cap iron (chipbreaker): A metal plate screwed onto the iron that breaks the shaving immediately after lifting it, to prevent tearing of the wood fibers.
Mouth: The opening in the sole through which the iron protrudes. A tight mouth is crucial for fine surfaces without tear-out.
The most important plane types and their areas of use
Type | Material/Shape | Purpose |
Scrub plane | Narrow, cambered iron | For quickly removing large amounts of material (rough work). |
Jack plane | Straight iron | For smoothing sawn-rough surfaces after scrubbing. |
Smoothing plane | Very fine mouth, often with cap iron | For final surface quality and cleaning impurities. |
Jointer plane | Very long plane body (up to 60 cm) | For accurate truing of long edges and flattening large surfaces. |
Block plane | Small metal body | Ideal for chamfers, end-grain work, and assembly tasks. |
Mechanical planing processes: The jointer and thickness planer
In modern joinery, stationary machines handle the heavy preparatory work.
Jointer: Here, the wood is guided over a rotating cutterhead to produce a first absolutely straight face and a square edge.
Thickness planer: The wood is fed through the machine, where it is planed to an exact, uniform dimension (the "thickness").
Maintenance and sharpening service
A plane is only as good as its iron. Dull tools lead to burn marks or tear-out in the wood. Proper reconditioning of plane irons as well as adjustment of plane soles require precision and experience. You can find competent contacts for transparent repair documentation at repair fair. Detailed maintenance documentation guarantees that your tool once again achieves the required cutting quality.