Wood preservative
Wood is a natural, renewable raw material, but outdoors it is constantly exposed to attacks. Wood preservatives are used to protect wood from destruction by fungi (rot), insects (woodworm, house longhorn beetle), as well as from weather influences such as UV radiation and moisture. A basic distinction is made between constructive wood protection (structural measures to drain water away) and chemical wood protection, in which active agents penetrate deeply into the material or seal the surface.
Classification of protective products by mode of action
Depending on the area of application and the hazard class of the wood, different products are used:
Primers (impregnations): These low-viscosity products penetrate deep into the wood pores. They often contain fungicides (against fungi) and insecticides. They form the basis for subsequent coats and prevent the "blue stain" of softwoods.
Stains: They are semi-transparent, so the natural grain of the wood remains visible. Thin-layer stains penetrate deeply and do not peel, while thick-layer stains provide a film-forming protection similar to varnish (ideal for dimensionally stable components such as windows).
Wood oils and waxes: These penetrate the surface without closing the pores. The wood remains diffusion-open ("breathable"). Oils such as linseed oil or teak oil protect against drying out and graying, but must be renewed regularly.
Opaque paints: They form a completely closed, colored layer. This offers the highest protection against UV rays and wetness, but completely conceals the wood structure.
Hazard classes (use classes) according to DIN EN 335
The choice of the right wood preservative depends on the location of the component:
Class 0: Interior, permanently dry (no chemical protection needed).
Class 1: Interior, no wetting (protection against insects).
Class 2: Covered, not directly weather-exposed, occasionally damp.
Class 3: Exterior, directly weather-exposed, but without ground contact (e.g., facades).
Class 4: Exterior with constant contact with soil or fresh water (e.g., posts).
Sustainability and health: avoiding biocides
Modern wood protection increasingly relies on physical barriers and natural ingredients. Products containing biocides should be avoided indoors. Active substances such as boron salts are mineral alternatives that effectively help against insects and fungi but have lower toxicity for humans. Thermally modified wood (thermowood) also requires no chemicals, as heat alters the cell structure so that fungi no longer find a breeding ground.
Professional restoration and documentation
If wood is already infested or the protective layer is damaged, professional refurbishment is crucial to avoid compromising structural integrity. You can find competent contacts for transparent repair documentation at repair fair. Complete documentation of the protective products and methods used is especially essential for load-bearing components for insurance purposes and to preserve the property's value.