Saw blade
The saw blade is the actual tool of every saw. Its task is to separate material from a workpiece by means of a large number of successive cutting edges (the teeth). In doing so, a narrow slot—the kerf—is created. The geometry, material, and arrangement of the teeth determine how fast, how cleanly, and in what material the cut is made. An incorrect saw blade not only leads to poor results such as burn marks or tear-out, but can also overload the machine or present a safety risk (kickback).
The Anatomy of a Circular Saw Blade
A modern composite saw blade usually consists of two main components:
Blade body: The base body made of hardened, laser-cut steel. It must be absolutely flat and have expansion slots so that it does not warp under heat.
Tooth tips: In high-quality blades, these are made of carbide (HM) or polycrystalline diamond (PCD), soldered onto the blade body. This enables an extremely long service life (edge retention).
Tooth Geometry: The Key to the Material
Depending on the intended application, the tooth shape varies significantly:
Flat tooth (FT): Robust and fast, ideal for rip cuts in solid wood along the grain.
Alternate top bevel tooth (ATB): The teeth are beveled alternately to the left and right. This is the standard for crosscuts in wood and panel materials, as the fibers are cut cleanly.
Triple-chip/flat tooth (TCG/FT): A combination for hard materials such as laminate, plastics, or aluminum. The trapezoidal scoring tooth relieves the flat tooth and prevents tear-out.
Hollow tooth (HT): Specially for coated panels, to achieve a perfect cut edge without a scoring blade.
Important Parameters for Choosing the Blade
Number of teeth (Z): More is not always better. Few teeth (e.g., Z=12 to 24) allow fast feed for rough cuts. Many teeth (e.g., Z=48 to 80) provide extremely fine, tear-out-free edges, but require more power.
Hook angle: A positive angle virtually pulls the blade into the wood (good for table saws). A negative angle presses the workpiece against the fence (important for miter saws to prevent the blade from "climbing").
Kerf width: Thin blades save material and energy (ideal for battery-powered machines), but are less stable with very thick beams.
[Image showing positive vs negative hook angle on saw blade teeth]
Maintenance: Sharpening and Cleaning
A dull saw blade can be recognized by increased resistance and dark burn marks on the wood. Often, however, the teeth are not dull but merely gummed up with resin. Cleaning with a special resin remover can often restore cutting performance. However, if the carbide edges are rounded off or chipped, the blade must be professionally resharpened on a CNC grinding machine.
Professional Overhaul and Service
Refurbishing precision tools belongs in the hands of specialists to preserve the blade’s geometry and balance. You can find competent partners for transparent repair documentation at repair fair. Complete documentation of the sharpening process ensures that your tools always deliver optimal performance and safety.