Sandpaper

Although it is often colloquially called “sandpaper,” modern sandpaper no longer contains any sand today. It is a flexible backing material (paper, fabric, or film) on which hard abrasive grains are fixed using a bonding agent. From a physical perspective, sanding is a machining process with geometrically undefined cutting edges: each individual grain acts like a tiny cutting edge that removes material from the workpiece. The goal is to level unevenness, remove old coatings, or roughen surfaces for painting or oiling.

The anatomy of the abrasive

The performance of sandpaper is determined by three main components:

  • The abrasive grain: Today, mostly synthetic materials are used, as they are sharper and more durable. Aluminum oxide (brown/white) is the standard for wood and metal. Silicon carbide (dark gray/black) is extremely hard and sharp, ideal for paints, glass, or stone. Zirconia alumina (blue) is used for heavy-duty applications on stainless steel or under high contact pressure.

  • The coating density: With a closed coat, the paper is densely covered with grains—ideal for fine sanding. An open coat leaves spaces in between so the paper does not clog as quickly on resinous woods or paints.

  • The bond: A base binder holds the grain on the backing, while a top binder (often synthetic resin) additionally supports the grain and prevents it from breaking out.

Grit size: the measure of roughness

The number on the back of the sandpaper indicates the grit size (based on the number of mesh openings in a sieve per inch). The higher the number, the finer the paper.

  • Coarse (P40 – P80): For rapid material removal, removing rust, or old paint layers.

  • Medium (P100 – P150): For smoothing wood surfaces before the first treatment.

  • Fine (P180 – P240): For intermediate sanding after priming or raising the grain of the wood with water.

  • Very fine (P320 – P600 and above): For scuff-sanding paints or for polishing sanding on metals.

Application tips: from coarse to fine

A common mistake is skipping grit steps. The rule is: never skip more than one step (e.g., from P80 to P120, then to P180). Each finer grit must remove the scratches from the previous, coarser step. With wood, sanding should also always be done in the direction of the grain to avoid cross-grain scratches that would become unattractively visible after oiling or staining.

Dust extraction and occupational safety

Sanding generates extremely fine dust that can be harmful to health. When using machines (random orbital sander, orbital sander), active dust extraction or at least a dust bag is essential. For hand-guided work or especially fine dust, a respirator protects the lungs from strain.

Professional restoration and service

High-quality surfaces on furniture, vehicles, or machines require professional equipment and a great deal of experience. For expert repair and restoration of your workpieces, you will find competent contacts at repair fair for transparent repair documentation. Complete documentation of the sanding and painting steps guarantees a perfect, long-lasting final result.