Forging

Forging is one of humanity’s oldest crafts and refers to the chipless forming of metals between two tools. In contrast to carpentry, where material is removed (sawing, planing), forging merely redistributes the volume of the workpiece. Through the targeted application of heat and mechanical pressure (hammer and anvil), the internal structure of the metal changes without interrupting the continuity of the grain. This makes forged components extremely resilient and tough.

The physical transformation: hot vs. cold forming

Depending on the metal and the desired result, different temperature ranges are used, which influence the lattice structure of the steel:

  • Hot forging: The metal is heated in the forge fire above the recrystallization temperature (for steel, usually bright red to yellow). In this state, it is soft like modeling clay and can be massively deformed, for example during forge welding.

  • Cold forging: The metal is formed at room temperature. This leads to "work hardening" – the material becomes harder and more brittle, which is used, for example, in goldsmithing to give jewelry pieces greater stability.

The basic shaping techniques

A blacksmith uses a handful of basic techniques to create complex geometries. These require a rhythmic interplay of eye and hand:

  1. Drawing out: The workpiece becomes longer and thinner.

  2. Upsetting: The metal becomes shorter and thicker through blows to the end face.

  3. Shouldering: Sharp edges or steps are created in the material flow.

  4. Punching: A punch is used to drive a hole into the glowing metal without removing material – the fibers are merely displaced to the side.

[Image showing the primary forging techniques: drawing out, upsetting, and punching]

Microstructure: the advantage over casting

The decisive quality difference compared to casting or milling lies in the "grain flow." During forging, the metal’s crystals are stretched in the direction of shaping. Similar to the grain direction in a stable fabric or the grain in glulam, this uninterrupted grain flow gives the workpiece superior strength against fracture and fatigue. In watchmaking, the smallest mainsprings are often forged to ensure this long-term elasticity.

Repair and preservation of craftsmanship values

Forged objects such as historic gates, tools, or artworks are built to last forever, but they require protection against corrosion. Proper restoration often means reheating the metal in a controlled way to relieve stresses or correct deformations.

You can find more about modern repair documentation at repair fair. Complete documentation of the reconstruction ensures that the microstructure and the artisanal authenticity of your forged unique pieces are preserved true to the original. Also discover our knowledge portal for even more information about crafts!