Plastering

Plastering is one of the crucial steps in finishing construction. Plaster is far more than a purely visual enhancement of shell walls. It forms a functional protective layer that shields the masonry from driving rain, mechanical stress, and extreme temperature fluctuations. Indoors, plaster also plays a central role in the room climate: it acts as a moisture buffer that absorbs water vapor and releases it again when the air is dry.

The material science: Which plaster for which purpose?

The choice of binder determines the physical properties of the wall:

  • Lime plaster: The favorite for healthy living. It is highly diffusion-open ("breathable") and, due to its high pH value, naturally prevents mold growth.

  • Cement plaster: The powerhouse. It is extremely resistant to moisture and pressure. That is why it is the first choice for plinth areas in exterior construction or for wet rooms such as basements and garages.

  • Gypsum plaster: The standard in modern interior finishing. It can be smoothed to an extremely fine finish (Q3 or Q4 quality) and dries quickly, but is sensitive to permanent moisture.

  • Clay plaster: The ecological highlight. Clay plaster has the best capillary conductivity and ensures an unbeatable indoor climate, but requires experience in application.

[Image showing different plaster textures: smooth, floated, and scratched finishes]

The build-up: the layering principle

A durable plaster is almost always built up in multiple layers to absorb stresses in the material:

  1. Base coat (render base): It evens out irregularities in the masonry and forms the load-bearing foundation. A reinforcement mesh is often embedded here to prevent cracks at material transitions.

  2. Finish coat (decorative plaster): The final layer. This is where the appearance is determined—from a smooth texture to rustic rubbed or scratched finishes.

Critical preparation: adhesion is everything

Plaster only holds as well as its substrate. Professionals pay meticulous attention to:

  • Absorbency: Highly absorbent masonry (e.g., aerated concrete) draws water too quickly from fresh plaster, which leads to "burning" and cracks. A primer helps here.

  • Cleanliness: Dust, formwork oil residues, or loose stone particles are adhesion killers.

  • Plaster profiles: Metal profiles are set at corners and edges, which not only ensure exact alignment but also protect the plaster from chipping when impacted.

The biggest sources of error in practice

  • Drying too quickly: Direct sunlight or drafts remove the hydration water the plaster needs. It "dries out" before it can harden.

  • Incorrect layer thicknesses: If plaster is applied too thickly in a single pass, sagging and cracks occur.

  • Ignoring drying times: The rule of thumb "one day of drying time per millimeter of layer thickness" is crucial before paint or wallpaper is applied. If these cycles are ignored, blistering and mildew stains may appear later.

The craft of precision

Plastering is the art of creating a homogeneous surface from a rough wilderness of stone. It requires a sensitive feel for material consistency and a deep understanding of building-physics processes. Whether in heritage preservation with historical lime mortar or in modern new builds with high-performance plasters: the quality of the plaster is a key factor in how well a building ages and how comfortable people feel inside it. Those who cut corners or rush here usually see the consequences after the first winter in the form of cracks and spalling. Learn more about transparent repair documentation here at repair fair.